Publications

  1. Chen, J. S.-S., and Feng, H. Y., “Idealization of Scanning-Derived Triangle Mesh Models of Prismatic Engineering Parts,” International Journal on Interactive Design and Manufacturing, in press.
  2. Chen, J. S.-S., and Feng, H. Y., 2016, “Structure-Altering Feature-Based Triangle Mesh Model Editing for Primitive-Based Engineering Parts,” Journal of Engineering Design, Vol. 27, No. 7, pp. 469-487.
  3. Wang, Y., and Feng, H. Y., 2016, “Effects of Scanning Orientation on Outlier Formation in 3D Laser Scanning of Reflective Surfaces,” Optics and Lasers in Engineering, Vol. 81, pp. 35-45.
  4. Gong, X., and Feng, H. Y., 2016, “Cutter-Workpiece Engagement Determination for General Milling Using Triangle Mesh Modeling,” Journal of Computational Design and Engineering, Vol. 3, No. 2, pp. 151-160.
  5. Khameneifar, F., and Feng, H. Y., 2016, “A New Methodology for Evaluating Position and Orientation Errors of Airfoil Sections,” International Journal of Advanced Manufacturing Technology, Vol. 83, No. 5, pp. 1013-1023.
  6. Wang, Y., and Feng, H. Y., 2015, “A Rotating Scan Scheme for Automatic Outlier Removal in Laser Scanning of Reflective Surfaces,” International Journal of Advanced Manufacturing Technology, Vol. 81, No. 1, pp. 705-716.
  7. Kumazawa, G. H., Feng, H. Y., and Barakchi Fard, M. J., 2015, “Preferred Feed Direction Field: A New Tool Path Generation Method for Efficient Sculptured Surface Machining,” Computer-Aided Design, Vol. 67-68, pp. 1-12.
  8. Wang, Y., and Feng, H. Y., 2015, “Outlier Detection for Scanned Point Clouds Using Majority Voting,” Computer-Aided Design, Vol. 62, pp. 31-43.
  9. Wang, Y., and Feng, H. Y., 2014, “Modeling Outlier Formation in Scanning Reflective Surfaces Using a Laser Stripe Scanner,” Measurement, Vol. 57, pp. 108-121.
  10. Khameneifar, F., and Feng, H. Y., 2014, “Airfoil Profile Reconstruction under the Uncertainty of Inspection Data Points,” International Journal of Advanced Manufacturing Technology, Vol. 71, No. 1, pp. 675-683.
  11. Chen, J. S.-S., and Feng, H. Y., 2014, “Automatic Prismatic Feature Segmentation of Scanning-Derived Meshes Utilising Mean Curvature Histograms,” Virtual and Physical Prototyping, Vol. 9, No. 1, pp. 45-61.
  12. Wang, Y., Feng, H. Y., Delorme, F.-E., and Engin, S., 2013, “An Adaptive Normal Estimation Method for Scanned Point Clouds with Sharp Features,” Computer-Aided Design, Vol. 45, No. 11, pp. 1333-1348.
  13. Azeem, A., and Feng, H. Y., 2013, “Cutting Force Prediction for Ball-End Mills with Non-Horizontal and Rotational Cutting Motions,” International Journal of Advanced Manufacturing Technology, Vol. 67, No. 5, pp. 1833-1845.
  14. Ma, J., Feng, H. Y., and Wang, L., 2013, “Normal Vector Estimation for Point Clouds via Local Delaunay Triangle Mesh Matching,” Computer-Aided Design and Applications, Vol. 10, No. 3, pp. 399-411.
  15. Rahman, A. K. M. A., and Feng, H. Y., 2013, “Effective Corner Machining via a Constant Feed Rate Looping Tool Path,” International Journal of Production Research, Vol. 51, No. 6, pp. 1836-1851.
  16. Tuysuz, O., Altintas, Y., and Feng, H. Y., 2013, “Prediction of Cutting Forces in Three and Five-Axis Ball-End Milling with Tool Indentation Effect,” International Journal of Machine Tools and Manufacture, Vol. 66, pp. 66-81.
  17. Feng, H. Y., Endrias, D. H., Taher, M. A., and Song, H., 2013, “An Accurate and Efficient Algorithm for Determining Minimum Circumscribed Circles and Spheres from Discrete Data Points,” Computer-Aided Design, Vol. 45, No. 2, pp. 105-112.
  18. Banerjee, A., Feng, H. Y., and Bordatchev, E. V., 2012, “Process Planning for Floor Machining of 2½D Pockets Based on a Morphed Spiral Tool Path Pattern,” Computers & Industrial Engineering, Vol. 63, No. 4, pp. 971-979.
  19. Endrias, D. H., Feng, H. Y., Ma, J., Wang, L., and Taher, M. A., 2012, “A Combinatorial Optimization Approach for Evaluating Minimum-Zone Spatial Straightness Errors,” Measurement, Vol. 45, No. 5, pp. 1170-1179.
  20. OuYang, D., Feng, H. Y., Jahangir, N. A., and Song, H., 2012, “Robust Initial Matching of Free-Form Objects Represented by Point Clouds,” ASME Journal of Manufacturing Science and Engineering, Vol. 134, No. 2, 021008:1-9.
  21. Banerjee, A., Feng, H. Y., and Bordatchev, E. V., 2012, “Geometry of Chip Formation in Circular End Milling,” International Journal of Advanced Manufacturing Technology, Vol. 59, No. 1-4, pp. 21-35.
  22. Wang, L., Ma, J., and Feng, H. Y., 2011, “Web-DPP: Towards Job-Shop Machining Process Planning and Monitoring,” International Journal of Manufacturing Research, Vol. 6, No. 4, pp. 337-353.
  23. Banerjee, A., Feng, H. Y., and Bordatchev, E. V., 2011, “Process Planning for Corner Machining Based on a Looping Tool Path Strategy,” Journal of Engineering Manufacture, Vol. 225, No. 9, pp. 1578-1590.
  24. Chen, J. S.-S., and Feng, H. Y., 2011, “Optimal Layer Setup Generation in Layered Manufacturing with a Given Error Constraint,” SME Journal of Manufacturing Systems, Vol. 30, No. 3, pp. 165-174.
  25. Barakchi Fard, M. J., and Feng, H. Y., 2011, “New Criteria for Tool Orientation Determination in Five-Axis Sculptured Surface Machining,” International Journal of Production Research, Vol. 49, No. 20, pp. 5999-6015.
  26. Wang, L., Keshavarzmanesh, S., and Feng, H. Y., 2011, “A Function Block Based Approach for Increasing Adaptability of Assembly Planning and Control,” International Journal of Production Research, Vol. 49, No. 16, pp. 4903-4924.
  27. OuYang, D., and Feng, H. Y., 2011, “Reconstruction of 2D Polygonal Curves and 3D Triangular Surfaces via Clustering of Delaunay Circles/Spheres,” Computer-Aided Design, Vol. 43, No. 8, pp. 839-847.
  28. Chen, J. S.-S., and Feng, H. Y., 2011, “Contour Generation for Layered Manufacturing with Reduced Part Distortion,” International Journal of Advanced Manufacturing Technology, Vol. 53, No. 9-12, pp. 1103-1113.
  29. Aras, E., and Feng, H. Y., 2011, “Vector Model-Based Workpiece Update in Multi-Axis Milling by Moving Surface of Revolution,” International Journal of Advanced Manufacturing Technology, Vol. 52, No. 9-12, pp. 913-927.
  30. Barakchi Fard, M. J., and Feng, H. Y., 2010, “Effective Determination of Feed Direction and Tool Orientation in Five-Axis Flat-End Milling,” ASME Journal of Manufacturing Science and Engineering, Vol. 132, No. 6, 061011:1-10.
  31. Keshavarzmanesh, S., Wang, L., and Feng, H. Y., 2010, “A Hybrid Approach for Dynamic Routing Planning in an Automated Assembly Shop,” Robotics and Computer-Integrated Manufacturing, Vol. 26, No. 6, pp. 768-777.
  32. Keshavarzmanesh, S., Wang, L., and Feng, H. Y., 2010, “Design and Simulation of an Adaptive and Collaborative Assembly Cell,” International Journal of Manufacturing Research, Vol. 5, No. 1, pp. 102-119.
  33. Wang, L., Cai, N., Feng, H. Y., and Ma, J., 2010, “ASP: An Adaptive Setup Planning Approach for Dynamic Machine Assignments,” IEEE Transactions on Automation Science and Engineering, Vol. 7, No. 1, pp. 2-14.
  34. Song, H., and Feng, H. Y., 2009, “A Progressive Point Cloud Simplification Algorithm with Preserved Sharp Edge Data,” International Journal of Advanced Manufacturing Technology, Vol. 45, No. 5-6, pp. 583-592.
  35. Feng, H. Y., Han, Z., Banerjee, A., Wang, L., and Bordatchev, E. V., 2009, “A Composite Fitting Model of Discrete Handbook Data for Peripheral End Milling,” International Journal of Advanced Manufacturing Technology, Vol. 44, No. 5-6, pp. 437-446.
  36. Barakchi Fard, M. J., and Feng, H. Y., 2009, “Effect of Tool Tilt Angle on Machining Strip Width in Five-Axis Flat-End Milling of Free-Form Surfaces,” International Journal of Advanced Manufacturing Technology, Vol. 44, No. 3-4, pp. 211-222.
  37. OuYang, D., Feng, H. Y., Van Nest, B. A., and Buchal, R. O., 2009, “Effective Gouge-Free Tool Selection for Free-Form Surface Machining,” Computer-Aided Design and Applications, Vol. 6, No. 6, pp. 839-849.
  38. Wang, L., Feng, H. Y., Song, C., and Jin, W., 2009, “Function Block Design for Adaptive Execution Control of Job Shop Machining Operations,” International Journal of Production Research, Vol. 47, No. 12, pp. 3413-3434.
  39. Banerjee, A., Bordatchev, E. V., and Feng, H. Y., 2009, “Determination of Minimum Limiting Axial Depth of Cut for 2½D Pocket Machining Based on Receptance Coupling,” Machining Science and Technology, Vol. 13, No. 2, pp. 177-195.
  40. Cai, N., Wang, L., and Feng, H. Y., 2009, “GA-Based Adaptive Setup Planning toward Process Planning and Scheduling Integration,” International Journal of Production Research, Vol. 47, No. 10, pp. 2745-2766.
  41. Wang, L., Cai, N., and Feng, H. Y., 2009, “Function Blocks Enabled Dynamic Set-up Dispatching and Execution Monitoring,” International Journal of Computer Integrated Manufacturing, Vol. 22, No. 1, pp. 3-12.
  42. OuYang, D., and Feng, H. Y., 2008, “Machining Triangular Mesh Surfaces via Mesh Offset Based Tool Paths,” Computer-Aided Design and Applications, Vol. 5, No. 1-4, pp. 254-265.
  43. Song, H., Feng, H. Y., and OuYang, D., 2008, “Automatic Detection of Tangential Discontinuities in Point Cloud Data,” ASME Journal of Computing and Information Science in Engineering, Vol. 8, No. 2, 021001:1-10.
  44. Song, H., and Feng, H. Y., 2008, “A Global Clustering Approach to Point Cloud Simplification with a Specified Data Reduction Ratio,” Computer-Aided Design, Vol. 40, No. 3, pp. 281-292.
  45. Cai, N., Wang, L., and Feng, H. Y., 2008, “Adaptive Setup Planning of Prismatic Parts for Machine Tools with Varying Configurations,” International Journal of Production Research, Vol. 46, No. 3, pp. 571-594.
  46. Wang, L., Keshavarzmanesh, S., and Feng, H. Y., 2008, “Design of Adaptive Function Blocks for Dynamic Assembly Planning and Control,” SME Journal of Manufacturing Systems, Vol. 27, No. 1, pp. 45-51.
  47. Song, H., and Feng, H. Y., 2007, “Point Cloud Simplification with Bounded Geometric Deviations,” International Journal of Computer Applications in Technology, Vol. 30, No. 4, pp. 236-244.
  48. Li, H., Tutunea-Fatan, O. R., and Feng, H. Y., 2007, “An Improved Tool Path Discretization Method for Five-Axis Sculptured Surface Machining,” International Journal of Advanced Manufacturing Technology, Vol. 33, No. 9-10, pp. 994-1000.
  49. Jiang, Q., Feng, H. Y., OuYang, D., and Desta, M. T., 2006, “A Roundness Evaluation Algorithm with Reduced Fitting Uncertainty of CMM Measurement Data,” SME Journal of Manufacturing Systems, Vol. 25, No. 3, pp. 184-195.
  50. Teng, Z., Feng, H. Y., and Azeem, A., 2006, “Generating Efficient Tool Paths from Point Cloud Data via Machining Area Segmentation,” International Journal of Advanced Manufacturing Technology, Vol. 30, No. 3-4, pp. 254-260.
  51. Tutunea-Fatan, O. R., and Feng, H. Y., 2006, “On the B-Spline Interpolated Tool Trajectories for Five-Axis Sculptured Surface Machining,” International Journal of Manufacturing Research, Vol. 1, No. 2, pp. 198-212.
  52. Wang, L., Jin, W., and Feng, H. Y., 2006, “Embedding Machining Features in Function Blocks for Distributed Process Planning,” International Journal of Computer Integrated Manufacturing, Vol. 19, No. 5, pp. 443-452.
  53. Wang, L., Cai, N., Feng, H. Y., and Liu, Z., 2006, “Enriched Machining Feature-Based Reasoning for Generic Machining Process Sequencing,” International Journal of Production Research, Vol. 44, No. 8, pp. 1479-1501.
  54. Azeem, A., Feng, H. Y., and Orban, P., 2005, “Processing Noisy Cutting Force Data for Reliable Calibration of a Ball-End Milling Force Model,” Measurement, Vol. 38, No. 2, pp. 113-123.
  55. OuYang, D., and Feng, H. Y., 2005, “On the Normal Vector Estimation for Point Cloud Data from Smooth Surfaces,” Computer-Aided Design, Vol. 37, No. 10, pp. 1071-1079.
  56. OuYang, D., Van Nest, B. A., and Feng, H. Y., 2005, “Determining Gouge-Free Ball-End Mills for 3D Surface Machining from Point Cloud Data,” Robotics and Computer-Integrated Manufacturing, Vol. 21, No. 4-5, pp. 338-345.
  57. Tutunea-Fatan, O. R., and Feng, H. Y., 2005, “Determination of Geometry-Based Errors for Interpolated Tool Paths in Five-Axis Surface Machining,” ASME Journal of Manufacturing Science and Engineering, Vol. 127, No. 1, pp. 60-67.
  58. Feng, H. Y., and Teng, Z., 2005, “Iso-planar Piecewise Linear NC Tool Path Generation from Discrete Measured Data Points,” Computer-Aided Design, Vol. 37, No. 1, pp. 55-64.
  59. Tutunea-Fatan, O. R., and Feng, H. Y., 2004, “Configuration Analysis of Five-Axis Machine Tools Using a Generic Kinematic Model,” International Journal of Machine Tools and Manufacture, Vol. 44, No. 11, pp. 1235-1243.
  60. Li, H., and Feng, H. Y., 2004, “Efficient Five-Axis Machining of Free-Form Surfaces with Constant Scallop Height Tool Paths,” International Journal of Production Research, Vol. 42, No. 12, pp. 2403-2417.
  61. Azeem, A., Feng, H. Y., and Wang, L., 2004, “Simplified and Efficient Calibration of a Mechanistic Cutting Force Model for Ball-End Milling,” International Journal of Machine Tools and Manufacture, Vol. 44, No. 2-3, pp. 291-298.
  62. Desta, M. T., Feng, H. Y., and OuYang, D., 2003, “Characterization of General Systematic Form Errors for Circular Features,” International Journal of Machine Tools and Manufacture, Vol. 43, No. 11, pp. 1069-1078.
  63. Wang, L., Feng, H. Y., and Cai, N., 2003, “Architecture Design for Distributed Process Planning,” SME Journal of Manufacturing Systems, Vol. 22, No. 2, pp. 99-115.
  64. Endrias, D. H., and Feng, H. Y., 2003, “Minimum-Zone Form Tolerance Evaluation Using Rigid-Body Coordinate Transformation,” ASME Journal of Computing and Information Science in Engineering, Vol. 3, No. 1, pp. 31-38.
  65. Feng, H. Y., and Li, H., 2002, “Constant Scallop-Height Tool Path Generation for Three-Axis Sculptured Surface Machining,” Computer-Aided Design, Vol. 34, No. 9, pp. 647-654.
  66. Xi, F., Liu, Y., and Feng, H. Y., 2001, “Error Compensation for Three-Dimensional Line Laser Scanning Data,” International Journal of Advanced Manufacturing Technology, Vol. 18, No. 3, pp. 211-216.
  67. Feng, H. Y., Liu, Y., and Xi, F., 2001, “Analysis of Digitizing Errors of a Laser Scanning System,” Precision Engineering, Vol. 25, No. 3, pp. 185-191.
  68. Feng, H. Y., and Su, N., 2001, “A Mechanistic Cutting Force Model for 3D Ball-End Milling,” ASME Journal of Manufacturing Science and Engineering, Vol. 123, No. 1, pp. 23-29.
  69. Feng, H. Y., and Su, N., 2000, “Integrated Tool Path and Feed Rate Optimization for the Finishing Machining of 3D Plane Surfaces,” International Journal of Machine Tools and Manufacture, Vol. 40, No. 11, pp. 1557-1572.
  70. Andrewes, C. J. E., Feng, H. Y., and Lau, W. M., 2000, “Machining of an Aluminum/SiC Composite Using Diamond Inserts,” Journal of Materials Processing Technology, Vol. 102, No. 1-3, pp. 25-29.
  71. Feng, H. Y., 1998, “A Rugged and Reliable System for Measuring Engine Crankshaft Speed Fluctuations,” ASME Journal of Dynamic Systems, Measurement, and Control, Vol. 120, No. 4, pp. 533-536.
  72. Feng, H. Y., and Menq, C. H., 1996, “A Flexible Ball-End Milling System Model for Cutting Force and Machining Error Prediction,” ASME Journal of Manufacturing Science and Engineering, Vol. 118, No. 4, pp. 461-469.
  73. Lim, E. M., Feng, H. Y., Menq, C. H., and Lin, Z. H., 1995, “The Prediction of Dimensional Error for Sculptured Surface Productions Using the Ball-End Milling Process. Part 1: Chip Geometry Analysis and Cutting Force Prediction,” International Journal of Machine Tools and Manufacture, Vol. 35, No. 8, pp. 1149-1169.
  74. Feng, H. Y., and Menq, C. H., 1994, “The Prediction of Cutting Forces in the Ball-End Milling Process – I. Model Formulation and Model Building Procedure,” International Journal of Machine Tools and Manufacture, Vol. 34, No. 5, pp. 697-710.
  75. Feng, H. Y., and Menq, C. H., 1994, “The Prediction of Cutting Forces in the Ball-End Milling Process – II. Cut Geometry Analysis and Model Verification,” International Journal of Machine Tools and Manufacture, Vol. 34, No. 5, pp. 711-719.